HP Compaq nc6000 - Notebook PC Hardware Guide

8–10 Hardware Guide
Hardware Upgrades
9. To insert the new memory module into either memory slot:
a. Align the keyed (notched) edge of the module 1 with the
keyed area in the expansion slot.
b. Press the module into the slot from a 45-degree angle
until it is seated, then push the module 2 downward until
the retention clips snap into place.
10. Replace the memory slot cover.
11. Replace the keyboard and snap the 4 keyboard latches back
into place.
12. Replace the keyboard access screws located on the bottom of
the notebook.
13. Replace the battery packs.
14. Reconnect external power and external devices.
15. Restart the notebook.
333644-001.book Page 10 Thursday, July 10, 2003 2:56 PM

HP Compaq nc6000 - Notebook PC Specifications

General

Processor	Intel Pentium M
Chipset	Intel 855PM
Storage	30 GB to 60 GB HDD
Hard Drive Interface	ATA-100
Battery	6-cell Lithium-Ion
Operating System	Windows XP Professional
RAM	256 MB, upgradable to 2 GB
Graphics	ATI Mobility Radeon 9600
Display	14.1-inch
Display Resolution	1024 x 768 or 1400 x 1050
Optical Drive	DVD-ROM, CD-RW/DVD Combo, or DVD±RW
Networking	10/100/1000 Ethernet
Ports	2 x USB 2.0, VGA, parallel, serial, headphone, microphone