HP 33S Owner's Manual

11–10 Statistical Operations
File name 33s-E-Manual-1008-Publication(1st).doc Page : 386
Printed Date : 2003/10/8 Size : 13.7 x 21.2 cm
Keys: Display: Description:
Å
70


_

Enters hypothetical x–value.
º %
{

ˆ
}

ˆ

ˆ
  


The predicted yield in tons per
hectare.
Limitations on Precision of Data
Since the calculator uses finite precision (12 to 15 digits), it follows that there are
limitations to calculations due to rounding. Here are two examples:
Normalizing Close, Large Numbers
The calculator might be unable to correctly calculate the standard deviation and
linear regression for a variable whose data values differ by a relatively small
amount. To avoid this, normalize the data by entering each value as the difference
from one central value (such as the mean). For normalized x–values, this difference
must then be added back to the calculation of
x
and
x
ˆ
, and
y
ˆ
and b must
also be adjusted. For example, if your x–values were 7776999, 7777000, and
7777001, you should enter the data as –1, 0, and 1; then add 7777000 back to
x
and
x
ˆ
. For b, add back 7777000
×
m. To calculate
y
ˆ
, be sure to supply
an x–value that is less 7777000.
Similar inaccuracies can result if your x and y values have greatly different
magnitudes. Again, scaling the data can avoid this problem.
Effect of Deleted Data
Executing
¹ -
does not delete any rounding errors that might have been
generated in the statistics registers by the original data values. This difference is
not serious unless the incorrect data have a magnitude that is enormous compared
with the correct data; in such a case, it would be wise to clear and reenter all the
data.

HP 33S Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Silver
Digits	10 digits
Display number of lines	2 lines
Keyboard type	Alphanumeric
Menus and prompts	Yes

Weight and Dimensions

Dimensions (WxDxH)	157 x 16 x 81 mm