Getting Started
1–11
File name 33s-E-Manual-1008-Publication(1st).doc Page : 386
Printed Date : 2003/10/8 Size : 13.7 x 21.2 cm
Note
You can choose either ALG (Al
ebraic) or RPN (Reverse Polish
Notation) mode for your calculations. Throu
hout the manual, the
“
v
“ in the mar
in indicates that the examples or keystrokes in
RPN mode must be performed differently in ALG mode.
Appendixes C explains how to use your calculator in ALG mode.
The Display and Annunciators
First Line
Second Line
Annunciators
The display comprises two lines and annunciators.
The first line can display up to 255 characters. Entries with more than 14 digits will
scroll to the left.
During inputting, the second line displays an entry; after calculating, it displays the
result of a calculation. Every calculation is displayed in up to 14 digits, including
an
sign (exponent), and exponent value up to three digits.
The symbols on the display, shown in the above figure, are called annunciators.
Each one has a special significance when it appears in the display.