HP 33S Owner's Manual

B–4 User Memory and the Stack
File name 33s-E-Manual-1008-Publication(1st).doc Page : 386
Printed Date : 2003/10/8 Size : 13.7 x 21.2 cm
Category CLEAR ALL MEMORY CLEAR
(Default)
Angular mode Unchanged Degrees
Base mode Unchanged Decimal
Contrast setting Unchanged Medium
Decimal point Unchanged "

"
Denominator (/c value) Unchanged 4095
Display format Unchanged FIX 4
Flags Unchanged Cleared
Fraction–display mode Unchanged Off
Random–number seed Unchanged Zero
Equation pointer EQN LIST TOP EQN LIST TOP
Equation list Cleared Cleared
FN = label Null Null
Program pointer PRGM TOP PRGM TOP
Program memory Cleared Cleared
Stack lift Enabled Enabled
Stack registers Cleared to zero Cleared to zero
Variables Cleared to zero Cleared to zero
Memory may inadvertently be cleared if the calculator is dropped or if power is
interrupted.
The Status of Stack Lift
The four stack registers are always present, and the stack always has a stack–lift
status. That is to say, the stack lift is always enabled or disabled regarding its
behavior when the next number is placed in the X–register. (Refer to chapter 2,
"The Automatic Memory Stack.")
All functions except those in the following two lists will enable stack lift.

HP 33S Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Silver
Digits	10 digits
Display number of lines	2 lines
Keyboard type	Alphanumeric
Menus and prompts	Yes

Weight and Dimensions

Dimensions (WxDxH)	157 x 16 x 81 mm