HP 33S - Checking Available Memory; Clearing All of Memory

1–24 Getting Started
File name 33s-E-Manual-1008-Publication(1st).doc Page : 386
Printed Date : 2003/10/8 Size : 13.7 x 21.2 cm
Checking Available Memory
Pressing
¹ u
displays the following menu:

Where

is the number of bytes of memory available.
Pressing the {

} menu key displays the catalog of variables (see "Reviewing
Variables in the VAR Catalog" in chapter 3). Pressing the {

} menu key displays
the catalog of programs.
1. To enter the catalog of variables, press {

}; to enter the catalog of programs,
press {

}.
2. To review the catalogs, press
Ø
or
×
.
3.
To delete a variable or a program, press
¹ ¡
while viewing it in its
catalog.
4. To exit the catalog, press
Å
.
Clearing All of Memory
Clearing all of memory erases all numbers, equations, and programs you've
stored. It does not affect mode and format settings. (To clear settings as well as
data, see "Clearing Memory" in appendix B.)
To clear all of memory:
1. Press
¹ ¡
{

}. You will then see the confirmation prompt


{

} {

}, which safeguards against the unintentional clearing of memory.
2. Press {

} (yes).