HP 33S Owner's Manual

Statistics Programs
16–15
File name 33s-E-Manual-1008-Publication(1st).doc Page : 386
Printed Date : 2003/10/8 Size : 13.7 x 21.2 cm
6. To calculate Q(X) given X,
t
D.
7. After the prompt, key in the value of X and press
¥
. The result, Q(X), is
displayed.
8. To calculate Q(X) for a new X with the same mean and standard deviation,
press
¥
and go to step 7.
9. To calculate X given Q(X), press
t
I.
10. After the prompt, key in the value of Q(X) and press
¥
. The result, X, is
displayed.
11. To calculate X for a new Q(X) with the same mean and standard deviation,
press
¥
and go to step 10.
Variables Used:
D Dummy variable of integration.
M Population mean, default value zero.
Q Probability corresponding to the upper–tail area.
S Population standard deviation, default value of 1.
T Variable used temporarily to pass the value S
×
π 2
to the
inverse program.
X Input value that defines the left side of the upper–tail area.
Example 1:
Your good friend informs you that your blind date has "3
σ
" intelligence. You
interpret this to mean that this person is more intelligent than the local population
except for people more than three standard deviations above the mean.
Suppose that you intuit that the local population contains 10,000 possible blind
dates. How many people fall into the "3
σ
" band
?
Since this problem is stated in
terms of standard deviations, use the default value of zero for M and 1 for S.
Keys:
(In RPN mode)
Display: Description:
t
S


Starts the initialization routine.
¥


A
ccepts the default value of zero for
M.
¥

Accepts the default value of 1 for S.

HP 33S Specifications

General

Type	Scientific
Form factor	Pocket
Product color	Silver
Digits	10 digits
Display number of lines	2 lines
Keyboard type	Alphanumeric
Menus and prompts	Yes

Weight and Dimensions

Dimensions (WxDxH)	157 x 16 x 81 mm