10
HP
98658A Small Controller Systems Interface Card
Operating System Support
Operating/language
system
support
is as follows:
• BASIC:
supported
on
revision 4.0
or
later
with
Series 300 controllers.
• Pascal System:
supported
on revision 3.1
or
later
with Series 300 controllers.
• HP-
UX
Operating System:
supported
on revision 5.0 or
later
with
Series 300
controllers.
Preliminary Requirements
Find
out
what
your application's accessory SCSI interface function values need
to
be set to. These functions are:
• Select Code.
•
Interrupt
level.
• Bus address.
• Parity.
Your
HP
98658A SCSI Interface
Card
must
be set
to
the
values your
application requires.
Setting the Configuration Switches
The
HP
98658A SCSI Interface
Card's
configuration switches are shown
in
Figure 10-12.
10-40 Configuring Popular Accessory Cards
To Next Page
Loading...
