Floating-Point Accelerator Chip Presence
Note
This section applies
to
Model 362 controllers only.
Look for a line
on
the
left side
that
reads:
MC68882
Coprocessor
If
that
line appears, your Model 362 controller has
the
floating-point
accelerator coprocessor chip installed.
Determining Internal Interface Configurations
The
Boot ROM configuration mode is used for internal interface configurations
or
Auto
System Selection for your controller.
Configure Mode is
run
and
controlled by
the
Boot ROM. You do
not
need
to
have
an
operating system installed
to
use Configure Mode.
If
the
operating system is installed
and
you want
to
enter Configure Mode, you
must prevent
the
operating system from booting. Instructions
are
provided
in
this chapter.
Finding Your. Controller's Existing Configuration 2-5
2
To Next Page
Loading...
Need help?
General
