HP 382 Hardware Configuration Guide

Your New RAM Configuration
You should refer to the sections explaining examples to help you learn about
your new RAM configuration.
Follow these steps
to determine your new RAM configuration:
1. Write the existing RAM board sizes in Table 5-2's 'Existing' row for each
slot.
2.
In Table 5-2, fill in the upgraded RAM board configurations as follows:
a.
RAM boards must be installed in pairs; each board in the pair must be
the same size.
b. Slot pair 'RAM Pair 0' must have the largest size RAM board pair.
c. Slot pair lRAM Pair l' must have boards equal to, or smaller than
boards in slot pair 'RAM Pair 0.'
3. Add up the Upgraded RAM board sizes and write the total in the
'Upgraded, Total' block of Table 5-2.
4. Remove
and/or replace RAM boards to match the configuration in
Table 5-2's 'Upgraded' row.
Table 5-2. Model 382: Existing Memory vs. Upgraded Memory
Total
RAM
PAIR 0 RAM PAIR 1
Existing
Upgraded
Memory Configurations 5·13
5

HP 382 Specifications

General

Brand	HP
Model	382
Category	Desktop
Language	English