HP 382 Hardware Configuration Guide

5
RAM Board Installation Requirements
• Boards must be installed in pairs; each board must be the same size.
• Slot pair labeled RAM PAIR 0 must have the largest size RAM board pair.
• Slots pair labeled RAM PAIR 1 boards must be equal to, or smaller than
boards in slot pair labeled RAM PAIR O.
Supported Memory Configurations
Table 5-1 lists all supported RAM board configurations for HP 9000 Series 300
Model 382 controllers that use HP A2202A, HP A2201A, and HP A2202A
RAM boards. Your controller has one of these configurations. After you
upgrade your controller with more memory, a larger configuration will be used.
Table 5·1.
Model 382: Total RAM vs. Slot Numbers and Board Sizes
Total
Memory
RAM PAIR 0
RAM PAIR 1
4 MBytes (2 MB)[2 MB)
8 MBytes
(4 MB)[4 MB)
8 MBytes
(2 MB)[2 MB)
(2 MB}[2 MB)
12 MBytes (4 MB][4 MB)
(2 MB}[2 MB)
16 MBytes (a MB][a MB)
16 MBytes (4 MB)[4 MB) (4 MB][4 MB)
20 MBytes (a MB) (aMB) (2 MB][2 MB)
24 MBytes
(a MB)(a MB)
(4MB)[4MB)
32 MBytes (a MB)[a MB)
(a MB][a MB)
5·12 Memory Configurations

HP 382 Specifications

General

Brand	HP
Model	382
Category	Desktop
Language	English