HP 382 Hardware Configuration Guide

7
If you do not have an expander
attached, skip now to step 15.
If you have an expander:
a.
Position the expander that
was attached to your
controller squarely over
the
controller.
b.
Align
its backplane bottom
connectors with the
controller / expander
backplane connectors.
c.
Lower the expander into
place mating the backplane
connectors.
8 Replace the expander's top
cover.
5
Memory Configurations 5-7

HP 382 Specifications

General

Brand	HP
Model	382
Category	Desktop
Language	English