1
With
Configuration Control menu
in
the upper-right corner
of
the
screen, enter
2 [Return
J.
Configuration
Control
Keys
Control
Class
1 I/O
Configuration
2 Auto System
Selection
A Abort
without
changes
Type [key]
RETURN
?
2
This
menu appears:
Auto System
Selection
Keys
Option
Status
1 Scan
for
System Y
2
Selected
System N
3
Store
Selected
Sys.
N
E
Execute
A Abort
without
changes
Type [key]
RETURN
?
3
The
prompt
? indicates
that
your controller is waiting for a
letter
or
number
input.
The
Auto
System Selection menu indicates
the
way your
system
is currently
set. Toggling
the
"Status" options by entering one
of
the
numbers under
"Keys" on
the
left will result
in
a new configuration which will be executed as
soon as you press
E.
For example,
if
your disks contain more
than
one operating system, you could
choose one as
the
Selected System by pressing
2,
followed by (Return
).
Configuring Internal Interfaces and Boot Modes 3-9
3
To Next Page
Loading...
Need help?
General
