HP 8168E - Page 105

5
:STATus:QUEStionable:PTRansition
Syntax :STATus:QUEStionable:PTRansition < wsp >< value >
Description This command sets the bits in the PTRansition register. Setting
a bit in this register enables a positive transition (0 ! 1) in the
corresponding bit in the CONDition register to set the bit in the
EVENt register.
:STATus:QUEStionable:PTRansition?
Syntax :STATus:QUEStionable:PTRansition?
Description This query returns the current contents of the
QUEStionable:PTRansition register.
Example OUTPUT 724;":STAT:QUES:PTR 1536"
OUTPUT 724;":STAT:QUES:PTR?"
ENTER 724;A$
:STATus:PRESet
Syntax :STATus:PRESet
Description This command presets all the enable registers and transition
lters for both the OPERation and QUEStionable nodes.
All the bits in the ENABle registers are set to 0
All the bits in the PTRansition registers are set to 1
All the bits in the NTRansition registers are set to 0
Example OUTPUT 724;":STAT:PRES"
Remote Commands 5-35