HP 8168E - Other Commands

5
:TRACe:POINts? < trace name >
Syntax :TRACe:POINts?
Description This query returns the number of data points that are in the
trace. Each data point is described by an x- and a y-value.
Example OUTPUT 724;":TRAC:POIN? CC_UNCAL"
ENTER 724;A$
:TRACe[:DATa]? < trace
name >
Syntax :TRACe [ :DATa ] ?
Description This query returns the trace data for the named trace
. The
information is returned as a string with the values separated by
commas ( , ). The values are grouped into data points. Each data
point has an x-value and a y-value. The x-values are given in
meters, the y-values are given in Watts.
Example OUTPUT 724;":TRAC? CC_UNCAL"
ENTER 724;A$
Other Commands
WAVEACT
Syntax WAVEACT < wsp >< value >
where
< value > is the wavelength. If no units are specied, < value >
is taken to be in meters.
Description This command allows the Tunable Laser Source to adjust the
wavelength at least 6 1pm of the wavelength meter reading.
Note
The accuracy of WAVEACT is dependent on the wavemeter
specication.
It is only as exact as the Wavelength meter.
5-38 Remote Commands