A
A
Installation
This appendix provides installation instructions for the tunable laser source.
It also includes information about initial inspection and damage claims,
preparation for use, packaging, storage, and shipment.
Safety Considerations
The Model tunable laser source is a Class 1 instrument (that is, an instrument
with an exposed metal chassis directly connected to earth via the power supply
cable). The symbol used to show a protective earth terminal in the instrument is
.
Before operation, you should review the instrument and manual, including the
red safety page, for safety markings and instructions.You must follow these to
ensure safe operation and to maintain the instrument in safe condition.
Initial Inspection
Inspect the shipping container for damage. If there is damage to the container
or cushioning, you should keep them until you have checked the contents of the
shipment for completeness and veried the instrument both mechanically and
electrically.
The Function Test gives a procedure for checking the operation of the
instrument. If the contents are incomplete, mechanical damage or defect is
apparent, or if an instrument does not pass the operator's checks, notify the
nearest Hewlett-Packard oce.
Installation A-1
To Next Page
Loading...
Need help?
General
