3
3
Other Functions
This chapter describes how to save and recall measurement settings for the
tunable laser source, and how to use the system functions of the instrument.
Storing and Recalling Instrument Settings
The
4
SETTING
5
key gives you access to the instrument settings displays. These
displays look as follows:
Figure 3-1. User Setting Number 1
There are seven settings:
Attenuator
When you have the optional attenuator installed, then the
setting also includes the laser output power (Pref), the
attenuation (Att), and the power mode (PowMode, or AttMode).
the Actual Setting, which is the setting being used by the instrument,
the Default Setting, and
ve user settings.
Other Functions 3-1
To Next Page
Loading...
