HP 8168E - Page 158

C
Polarization Extinction Ratio: > 15dB for HP 8167A and HP 8168D over the
full wavelength range; > 15dB for HP 8168E/F between 1490 and 1575nm,
( > 12dB over the full wavelength range).
HP-IB Interface
HP-IB Interface function code: SH1, AH1, T6, L4, SR1, RL1, PP0, DC2, DT0,
C0
Passive Component Test Software
Files and data can be stored on memory cards according to PCMCIA type 1,
standard PCMCIA 1.0/JEIDA 4.0. Type 1 cards are 3.3mm thick. Recommended
card capacity 512kByte.
Laser Class
HP8167A, HP8168D/E: Class 1 according to FDA 21 CFR 1040.10, Class 3A
according to IEC 825-1 (1993).
HP 8168F: Class IIIb according to FDA 21 CFR 1040.10, Class 3A according to
IEC 825-1 (1993).
Analog output: provides output voltage proportional to optical output power
(except #003).
Recalibration period: 1 year (2 years for models with a Serial Number of
3426G00176 and over).
Warm-up time: typically < 1 hour, can be used with reduced power in this
phase.
Environmental
Altitude: up to 4,600m (15,000 feet).
Storage temperature: -40

C to +70

C
Operating temperature: 10

Cto35

C
Humidity: < 95%R.H. (10

Cto35

C)
Installation Category (IEC 664): II
Pollution Degree (IEC 664): 2
Specications are valid at non-condensing conditions.
Power: 100 to 240V
rms
, 6 10%. 260VA maximum.
C-8 Specications