3
Figure 3-3. The System Screen
Figure 3-4. Summary of the System Hard- and Softkeys
There are not enough function keys under the display for all the system
functions, therefore they have been divided into two sections.You change from
one section to the other by pressing the
NNNNNNNNNNNNNN
More
Softkey.
Switching the Instrument into Stand-By
Increasing the Lifetime of the Display
Normally the display is on at all times. If you want to switch o the display
(and the laser), but keep the instrument running (for example, to prevent
Other Functions 3-3
To Next Page
Loading...
