HP 8647A - Page 102

output
I Range
I + 10 to -136 dBm
J
Reverse power protection
Display Resolution
10.1 dB
50 watts into 50
ohms
Accuracy* I k1.5 dB
* Accuracy is valid from maximum specified output power to -127 dBm. It's typically f3.0 dB below -127 dBm.
Residual FM (CCIlT, rms)
< 249 MHz
< 501 MHz
5 1OOOMHz
< 20 Hz, typically < 11 Hz
< 10 Hz, typically < 6 Hz
< 20 Hz, typically < 11 Hz
SWR (output < -6 dBm, typical) I 2.O:l I
SSB Phase Noise (at 20 kHz ofset, typical)
at f, 500 MHz
at f, 1000 MHz
Output Impedance
1 Nominally 50 ohms
< -11Od&/HZ
< -106dBC/Hz
Spectral Purity
~~ ~
Harmonics
I < -30 dBc (output 5 + 4 dBm)
Nonharmonics (> 5 kHz offset, 5 +4 dBm output level)
* Non-harmonic spurious are -55 dBc from 220 to 250 MHz.
I < -60 dBc*
Specifications 4-3