HP 8647A - Adrs; Local

i=
1
2
hplbkeya.dm
1. ADRS
Press (ADRS] to view the instrument's HP-IB address setting in the
second line of the FREQUENCY display.
To change the address, press (ADRS) and a two-digit number. For
example, enter
01 to set the address to 1.
Acceptable HP-IB addresses are 00 through 30.
2. LOCAL
Press (J5'CT) to return to front-panel operation when the instrument
has been set for remote (HP-IB) operation. The
SEQ and REG fields
will replace the HP-IB status indications in the second line of the
FREQUENCY display when the instrument is returned to local
operation.
Operation Reference lb-9