HP 8647A - Register Recall Arrows

Memory
2. REG
Press CREGJ and a register number (00 through 99) to recall the
operating settings saved in that register.
The number of the
last register recalled appears in the display along
with the number of the currently selected sequence.
You can only recall registers from the currently selected sequence.
To recall a register from another sequence you must first select the
sequence using the key.
3. Register Recall
Arrows
The recall f&) and
registers. The last key pressed
(SEQ or REG) determines which field is
affected by the arrow keys.
(Refer to
“4. SEQ” for further information about register sequences.)
keys can be used to select sequences or recall
lb-12 Operation Reference