Memory
memkeyl
.drw
4
4.
SEQ
Press
(SE91
and a sequence number
(0
through
9)
to select a register
sequence. When you select a sequence, the number of the sequence
appears in the display along with the number
of
the first register
saved in the sequence. The instrument is set to the operating settings
saved in the first register.
If
no registers have been saved in the
sequence, a message is displayed to let you know.
Note
~ ~
Selecting the sequence you are currently in is a quick way to return
to the beginning of the sequence.
A
sequence can include up to
100
registers
(00
through
99).
(There
are a total of
300
registers available in the instrument.) Registers are
automatically assigned to the currently selected sequence when they
are saved.
The registers saved in any given sequence are independent from the
registers in any other sequence. This allows you
to
create
up
to
10
different register sequences. Consequently, it
is
possible to have up
to ten registers with the same number (for example,
REG
01)
each
assigned to a different sequence and each with different operating
settings saved in it.
Operation Reference
lb-13
To Next Page
Loading...
