HP 8647A - Turning the Reference Mode off or

Offsetting the RF
3. Offset the output frequency 10 MHz below the reference
output frequency.
You can enter in the offset value directly, or use the knob or
and
a keys.
490.00000 MHz
Attention!
In the reference mode, the output frequency equals the reference
frequency
k the displayed offset frequency.
Turning the Reference Mode Off or On
4. Turn-off the reference mode to display the actual output
frequency.
5. Turn-on the reference mode without changing the reference
frequency.
FREQUENCY 1- MODULATION - AMPLITUDE
- 1O.OOOOOnMHz
la-1 8 Operation Examples