023
Copyingregistersto
8647/8
This message
is
displayed while the memory registers are
being copied from the HP 83301A Memory Interface to the
instrument.
Invalid
data
in Memory Interface
This message
is
displayed when the instrument detects that
the HP 83301A Memory Interface does not contain valid
memory register data. Try copying a memory register into
the memory interface first, then initiate a copy from the
memory interface
to
the instrument again.
Communication failure
:
copy aborted
This message is displayed when the instrument is not able to
successfully copy memory registers between the instrument
and the HP 83301A Memory Interface. This message
will
be displayed if the cable connecting the instrument
to
the
primary interface is disconnected during the copy process.
024
025
02
6
Memorycopywas successful
This message
is
displayed when the instrument has
successfully copied the memory registers between the
instrument and the HP 83301A Memory Interface. When
this message is displayed, the copy process
is
complete
and you can disconnect the memory interface from the
instrument.
Ic.4
Operation
Messages
To Next Page
Loading...
