Turning On the
If you are operating this instrument in extreme environmental
conditions, refer to the following operation limitations.
The following minimum conditions are required for safe operation
of
this instrument:
I
Indoor use
I
Altitude
<
4572
meters (15,000 feet)
I
Temperature:
0
"
to
50
"C, unless specified differently
w
Maximum relative humidity
80%
for temperatures up to
31
OC
decreasing linearly to
50%
relative humidity
at
40
OC
The instrument performs
a
diagnostic self test on power-up.
If
any
problems are detected with functionality it will display
a
message.
Refer to Chapter IC, "Operation Messages,
"
for further information
about the messages.
Signal Generator
Caution
This instrument
is
designed for use in Installation Category
I1
and
Pollution Degree 2 per IEC 1010 and
664
respectively.
Connecting
to
Coaxial
mating connectors used with the signal generator should be
v
either
500
BNC
or
500
type
N
male connectors that are compatible
with those specified in
UL
MIL-C-39012.
Other
Instruments
Storing the Signal
The instrument should be stored in
a
clean,
dry
environment. The
following environmental limitations apply to both storage and
shipment.
Generat
or
Note
Temperature -20 OC to
+
70
"C
I
Humidity
<
95% relative
I
Altitude 15,300 meters
(50,000
feet)
The cabinet should only be cleaned using
a
damp cloth.
Installation
3-5
To Next Page
Loading...
Need help?
General
