To Next PageTo Next Page
Need help?Do you have a question about the HP A3100-8 v2 SI and is the answer not in the manual?
Sets duplex mode, speed, description, and shutdown status for Ethernet interfaces.
Manages traffic storm suppression and control to prevent network congestion and instability.
Adds, modifies, or removes static and blackhole MAC address entries for security.
Manually groups multiple Ethernet links into a single logical link for increased bandwidth and reliability.
Dynamically bundles Ethernet links using LACP for automatic link aggregation management.
Defines MST regions, mapping VLANs to instances, and setting revision levels for spanning tree instances.
Specifies devices as primary or secondary root bridges for spanning tree instances.
Enhances network stability by enabling BPDU guard, root guard, and loop guard features.
Creates VLANs, assigns names, and configures basic settings for network segmentation.
Assigns ports to specific VLANs using access, trunk, or hybrid link types.
Enables voice VLANs, configuring QoS settings and assignment modes for voice traffic.
Configures advanced QinQ policies for adding different outer VLAN tags based on inner VLAN tags.
Applies a global QoS policy for one-to-one VLAN mapping, re-marking CVLAN IDs to SVLAN IDs.
Enables LLDP globally and on ports, and sets operating modes and re-initialization delays.
General
