HP BladeSystem c7000 User Manual

Planning the installation 6
Planning the installation
Verifying the pallet contents
Item Name Description
1
HP BladeSystem c7000 Enclosure The HP BladeSystem enclosure
2
Rear cage The rear section of the enclosure
3
Device bay blank A mandatory insert installed in any unused device bay
4
Power supply blank A mandatory insert installed in any unused power
supply bay
5
Enclosure hot-plug power supply (quantity
as ordered)
The power supply for the enclosure
6
Full-height device (quantity as ordered) The full-height server or storage blade
7
Half-height device (quantity as ordered) The half-height server or storage blade
8
Local I/O cable A cable with serial, USB, and video connectors that
connects to the I/O connector on the front of a blade
9
Fan blank A mandatory insert installed in any unused fan bay
10
HP Active Cool 200 Fan (quantity as
ordered)
A fan used to cool the components installed in the
enclosure

HP BladeSystem c7000 Specifications

General

Form Factor	10U
Number of Bays	16
Redundant Power	Yes
Redundant Fans	Yes
Maximum Blade Servers	16 half-height or 8 full-height
Operating Temperature	10° to 35°C (50° to 95°F)
Power Supplies	Up to 6
Cooling Fans	10
Management	Onboard Administrator
Interconnect Modules	Up to 8
Networking Options	Ethernet, Fibre Channel, InfiniBand
Compatibility	HP ProLiant and Integrity server blades
Relative Humidity	10% to 90% (non-condensing)