HP Compaq dc7100 DT User Manual

Service Reference Guide, dc7100 361288-003 6–37
Removal and Replacement Procedures - Convertible Minitower (CMT) Chassis
6.20 Speaker
1. Prepare the computer for disassembly (Section 6.1).
2. Remove the computer access panel (Section 6.5).
3. Disconnect the speaker wire from the system board.
4. Remove the four screws from the inside of the chassis 1 that secure the speaker to the
chassis.
5. Remove the speaker 2.
To install the speaker, reverse the removal procedures.

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA