HP Compaq dc7100 DT User Manual

2–10 361288-003 Service Reference Guide, dc7100
Setup Utilities and Diagnostics Features
Power OS Power
Management
• Runtime Power Management - Enable/Disable. Allows certain
operating systems to reduce processor voltage and frequency
when the current software load does not require the full
capabilities of the processor.
• Idle Power Savings - Extended/Normal. Allows certain
operating systems to decrease the processors power
consumption when the processor is idle.
• ACPI S3 Support - Enables or disables ACPI S3 support.
• ACPI S3 Hard Disk Reset - Enabling this causes the BIOS to
ensure hard disks are ready to accept commands after
resuming from S3 before returning control to the operating
system.
• ACPI S3 PS2 Mouse Wakeup - Enables or disables waking from
S3 due to PS2 mouse activity.
Hardware Power
Management
SATA power management enables or disables SATA bus and/or
device power management.
Thermal Fan idle mode - This bar graph controls the minimum permitted fan
speed.
Heading Option Description
✎
Support for specific Computer Setup options may vary depending on the hardware configuration.

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA