HP Compaq dc7100 DT User Manual

3–14 361288-003 Service Reference Guide, dc7100
Desktop Management
Pre-Boot Authorization Allows you to enable/disable the Smart Card to be used in
place of the Power-On Password.
Smart Cover Allows you to:
• Enable/disable the Cover Lock.
• Enable/disable the Cover Removal Sensor.
✎
Notify User alerts the user that the sensor has detected that
the cover has been removed. Setup Password requires that
the setup password be entered to boot the computer if the
sensor detects that the cover has been removed.
This feature is supported on select models only. See the
Desktop Management Guide on the Documentation CD for
more information.
Embedded Security Allows you to:
• Enable/disable the Embedded Security device.
• Reset the device to Factory Settings.
This feature is supported on select models only.
See HP ProtectTools Embedded Security Guide, on the
Documentation CD for more information.
Device Security Enables/disables serial ports, parallel port, front USB ports,
system audio, network controllers (some models), MultiBay
devices (some models), and SCSI controllers (some models).
Network Service Boot Enables/disables the computer’s ability to boot from an
operating system installed on a
network server. (Feature
available on NIC models only; the network controller must
reside on the PCI bus or be embedded on the system board.)
System IDs Allows you to set:
• Asset tag (18-byte identifier) and ownership Tag (80-byte
identifier displayed during POST).
See the Desktop Management Guide on the
Documentation CD for more information.
• Chassis serial number or Universal Unique Identifier
(UUID) number. The UUID can only be updated if the
current chassis serial number is invalid. (These ID numbers
are normally set in the factory and are used to uniquely
identify the system.)
Keyboard locale setting (for example, English or German) for
System ID entry.
Computer Setup Utilities (F10) Security Features (Continued)
Feature Description
✎
For more information about Computer Setup, see the Computer Setup (F10) Utility Guide.
Support for security features may vary depending on your specific computer configuration.

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA