Hardware options installation 78
b.
Install a second hot-plug power input module in the power supply bay 2.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
14. Install the system air baffle (on page 22).
15. If removed, install the PCI air baffle ("Install the PCI air baffle" on page 20).
16. Install the access panel (on page 18).
17. Connect the power cords to the power supplies.
18. Connect the power cords to the AC power source.
19. Install the strain relief clip.
To Next Page
Loading...
