EN
Troubleshooting the Printing System
7-21
FLASH FILE
SYSTEM IS FULL
The flash DIMM is full. 1. Delete files from the
flash DIMM or add
another DIMM.
2. Download or delete
files from HP JetAdmin,
and download or delete
fonts from HP FontSmart.
(See the software help for
more information.)
FLASH IS
WRITE PROTECTED
The flash DIMM is
protected, and no new
files can be written to it.
Disable the write
protection through
HP JetAdmin.
INITIALIZING
If the message displays
continually, a DIMM may
not be inserted
completely.
Reseat DIMM(s).
INPUT DEVICE
CONDITION xx.yy
An input paper handling
device has a condition
that needs attention
before printing can
resume.
1st X= Device number in
chain.
2nd X= Device type
(3 types):
1 Input
2 Output
3 Stapler/ stacker unit
yy= Device specific error.
See the documentation
that came with the paper
handling device for
assistance.
INSTALL TRAY x
The printer is unable to
print the current job
because the specified tray
(
x
) is open or not inserted
correctly.
1. Re-insert the specified
tray.
2. Check for damaged
tabs in the tray.
3. Check for damaged
switches in the printer.
4. Replace the PCA
Controller in the feeder.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action
To Next Page
Loading...