7-20 Troubleshooting
EN
DISK IS
WRITE PROTECTED
The EIO disk is protected,
and no new files can be
written to it.
Disable the write
protection through
HP JetAdmin.
ENV FEEDER LOAD
[TYPE] [SIZE]
There is no envelope in
the feeder, the wrong size
is loaded in the feeder, or
the type and size is set
incorrectly in the Control
Panel.
1. Load the requested
envelope type and size
into the Envelope Feeder.
2. Make sure the envelope
size and type are set
correctly from the Paper
Handling Menu in the
printer’s Control Panel.
3. Press
[Go]
if the
desired envelope is
already loaded in the
feeder.
4. Press
[-Value+]
to
scroll through the
available types and sizes.
5. Press
[Select]
to
accept the alternate type
or size.
FLASH DEVICE
FAILURE
The flash DIMM had a
critical failure and no
longer can be used.
Remove the flash DIMM
and replace it with a new
one.
FLASH FILE
OPERATION FAILED
The requested operation
could not be performed.
You might have
attempted an illegal
operation, such as trying
to download a file to a
non-existent directory.
1. Check the filename and
directory name.
2. Reattempt the
operation.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action
To Next Page
Loading...