EN
Troubleshooting the Printing System
7-27
UNSUPPORTED SIZE
IN TRAY [YY]
An external paper
handling device detected
an unsupported paper
size. The printer will go
offline until the condition is
corrected.
Load a supported paper
size in the tray.
USE [TYPE]
[SIZE] INSTEAD?
If the requested paper
size or type is not loaded,
the printer asks if it should
use another paper size or
type instead.
1. Press
[-Value+]
to
scroll through the
available types and sizes.
2. Press
[Select]
to
accept the alternate type
or size.
WAIT FOR PRINTER
TO REINITIALIZE
The RAM disk setting has
been changed from the
printer’s Control Panel.
This change will not take
effect until the printer
reinitializes.
Wait for the printer to
reinitialize.
WRONG ENVELOPE
FEEDER INSTALLED
The Envelope Feeder you
are trying to install will not
work for this printer.
Install the correct
envelope feeder instead.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action
To Next Page
Loading...