HP LaserJet 4000 - Page 224

7-30 Troubleshooting
EN
20 INSUFFICIENT
MEMORY
alternates with
PRESS GO TO
CONTINUE
The printer received more
data than can fit in its
available memory. You
might have tried to
transfer too many
macros, soft fonts, or
complex graphics.
Press
[Go]
to print the
transferred data (some
data might be lost), then
simplify the print job or
install additional memory.
21 PAGE TOO COMPLEX
alternates with
PRESS GO TO
CONTINUE
The data (dense text,
rules, raster or vector
graphics) sent to the
printer was too complex.
Press
[Go]
to print the
transferred data. (Some
data might be lost.)
To print the job without
losing data, from the
Configuration Menu in the
printer’s Control Panel, set
PAGE PROTECT=ON
,
print the job, and then
return
PAGE
PROTECT=AUTO
. Do not
leave
PAGE
PROTECT=ON
; it might
degrade performance.
If this message appears
often, simplify the print
job.
22 EIO x
BUFFER OVERFLOW
alternates with
PRESS GO TO
CONTINUE
Too much data was sent
to the EIO card in the
specified slot (
x
).
Press
[Go]
to clear the
message. (Data will be
lost.)
Table 7-6. Numerical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action