HP NonStop SSH 544701-014

262 • STN Reference HP NonStop SSH Reference Manual
• CAUSE: I/O error opening the OSS Terminal Helper ($ZTTnn) process.
• EFFECT: The affected terminal session may hang.
• ACTION: None. Recovery is automatic. If other symptoms are noted, such as hanging sessions, include this
EMS event when reporting the problem.
zstn-evt-th-writeread-err value is 1035
"<1> Writeread TH <2> error <3>"
<1> - STN process name
<2> - Terminal Handler process name
<3> - Guardian writeread file error code
• CAUSE: I/O error writing to the OSS Terminal Helper ($ZTTnn) process.
• EFFECT: The affected terminal session may hang.
• ACTION: None. Recovery is automatic. If other symptoms are noted, such as hanging sessions, include this
EMS event when reporting the problem. Recovery is automatic.
zstn-evt-gwn-file-err value is 1058
"<1> GWN File <2> error <3> on <4>"
<1> - STN process name
<2> - GWN file name
<3> - Guardian file error code
<4> - File operation where error occured
• Cause: An error occured on the GWN file.
• Effect: STN will attempt to recover. Additional related EMS event(s) will give further information.
• Action: None, but see additional EMS events.
zstn-evt-gwn-file-created value is 1059
"<1> GWN File <2> Created"
<1> - STN process name
<2> - GWN file name
• Cause: STN created a new GWN file based in GWN^FILE because the file did not already exist.
• Effect: GWN startup continues.
• Action: None. Informational only.
zstn-evt-gwn-file-init value is 1060
"<1> GWN File <2> Initialized to <3>"
<1> - STN process name