HP NonStop SSH Reference Manual STN Reference • 263
<2> - GWN file name
<3> - Window name
• Cause: STN created a new GWN file
• Effect: The GWN file is initialized to the specified window name.
• Action: None. Informational only.
zstn-evt-gwn-file-bad-data value is 1061
"<1> GWN File <2> contains bad data <3>"
<1> - STN process name
<2> - GWN file name
<3> - Sample of bad data
• Cause: STN encountered unexpected data in the GWN file.
• Effect: GWN is disabled.
• Action: Correct the problem with the file, purge the file, or change PARAM GWN^FILE to the proper filename,
then restart STN.
zstn-evt-gwn-disabled value is 1062
"<1> GWN File disabled - using <2> session/window names"
<1> - STN process name
<2> - Number of session/window names
• Cause: STN encountered an error with GWN processing as detailed in a previous event. This event also occurs
once at STN startup, when no PARAM GWN^FILE is present.
• Effect: Future window names for this STN process use the traditional #ZWNnnnn scheme. If this error occurs
for multiple STN processes, then duplicate #ZWN names can occur.
• Action: Correct the underlying error and restart the STN process.
zstn-evt-gwn-allocated value is 1063
"<1> GWN File <2> Allocated names <3> to <4>"
<1> - STN process name
<2> - GWN file name
<3> - first window name allocated to this STN process
<4> - last window name allocated
• Cause: This STN process allocated (reserved) a block of window names from the GWN file.
• Effect: The specified window names will be used for future sessions for this STN process
• Action: None. Informational only.
To Next Page
Loading...
