HP NonStop SSH Reference Manual STN Reference • 271
STN19 Add Window failed for Dynamic Service
User entered a dynamic service name in response to the menu, but a new dynamic window could not be added, usually
due to a resource shortage. Notify support.
STN20 Starting Dynamic Service application
STN is starting the application for the requested dynamic service.
STN21 Dynamic Service Application Creation Error
STN was not able to start the application for the requested dynamic service. An additional message STN22-STN34 is
displayed with error details from PROCESS_CREATE_.
STN22 file error <fe> on PROGRAM file
PROCESS_CREATE_ error 1: File system status <fe> on PROGRAM file.
STN23 file error <fe> on LIB file
PROCESS_CREATE_ error 3: File system status <fe> on LIB file.
STN24 file error <fe> on SWAP file
PROCESS_CREATE_ error 5 or 6: File system status <fe> on SWAP file.
STN25 file error <fe> on HOME TERM file
PROCESS_CREATE_ error 8 or 9: File system status <fe> on HOME file.
STN26 CPU(s) configured for this service are down
PROCESS_CREATE_ error 10: none of the CPUs for this service are running.
STN27 file error <fe> on process name
PROCESS_CREATE_ error 11: File system status <fe> on HOME file.
STN28 PROGRAM file format error <detail>
PROCESS_CREATE_ error 12: PROGRAM file error, see detail.
STN29 LIB file format error <detail>
PROCESS_CREATE_ error 13: LIB file error, see detail.
STN30 no pcb available
To Next Page
Loading...
Need help?
General