HP NonStop SSH Reference Manual STN Reference • 273
STN40 Operating in limited mode
If the STN LICENSE file has an EXPIRE date that has already passed, but the LICENSE parameters are otherwise valid,
then STN will operate in limited mode with only two Telnet sessions allowed. SSH (PTY) sessions are always allowed.
STN41 The requested dynamic service application was started, but did not connect to this Telnet
window within 60 seconds. The application, and this Telnet session are being stopped.
This generally indicates a programming error in the application for the dynamic service. Contact the system
administrator.
STN42 open (for startup messag
e) error on process <p> fe <fe>
For dyna
mic
windows,
STN t
ried to
open t
he ne
wly crea
ted a
pplicat
ion pr
ocess
<p> to
pass t
he star
tup m
essage,
but the
open was rejected with file system error <fe>. Contact the system administrator.
STN43 write (for startup messag
e) error on process <p> fe <fe>
For dynamic windows, STN opened the newly created application process <p> to pass the startup message, but the write
was rejected with file system error <fe>. Contact the system administrator.
STN44 Application has connected to this window
STN has detected an open from the application program. The next message will be from the application (e.g. TACL
prompt).
STN45 Maximum number of users exceeded - session will be terminated
The number of simultaneous active sessions exceeded the limit specified in the LICENSE file USERS parameter, or the
limit of two when operating in limited mode.
STN46 Secure session: <SSL/TLS or SSH info>
This is an informational message to emphasize that the session is secure. Encryption details are provided.
STN47 Unencrypted session (not secure)
This is an informational message to emphasize that no encryption is being used for this session.
STN48 <window-or-service>
This is an informational message to echo the response to the menu prompt. This is especially useful when the service
name is automatically entered by the terminal emulator.
STN50 Negotiation timeout - check Line Mode setting in terminal emulator. Session terminated.
Telnet IAC negotiations did not complete within 20 seconds.
To Next Page
Loading...
Need help?
General