Troubleshooting
Recovering Software
92 User’s Handbook
Recovering Software
You can use the OmniBook Recovery CD to reinstall the original factory software on
your hard disk drive.
If you need to configure a custom system, you can get OmniBook-specific drivers from
these locations:
• On the Recovery CD ROM, under \Omnibook\Drivers.
• On the OmniBook hard drive under C:\Omnibook\Drivers.
• On the HP Customer Care website at http://www.hp.com/cposupport/eschome.html.
This website contains the latest updates of software drivers.
Detailed instructions for installing the drivers are contained in the Drivers\Readme file.
Note
You’ll find drivers for the operating system that was shipped with your OmniBook on
the hard drive and on the Recovery CD. If you want drivers for a different operating
system, see the HP Customer Care website.
To Next Page
Loading...
Need help?
General