Expanding the OmniBook
Using the External Module Bay
User’s Handbook 53
To remove or install the bay or module
For Windows 95 or Windows 98, if Agaté Tioman hot-swap software is installed, a plug-
in module icon appears at the right end of the taskbar. This software lets you disconnect
most plug-in modules without shutting down the computer. For a hard drive module, you
must shut down the computer.
Windows 2000 displays the Unplug or Eject Hardware icon at the right end of the taskbar
when a drive module is present.
CAUTION
If you are connecting or disconnecting a CD-ROM drive, DVD drive, or any other
type of drive, you must use the icon in the taskbar or shut down the computer—
otherwise, you could lose data.
Do not touch the metallic pins in OmniBook connectors, module connectors, or
cable connectors. Static electricity can damage internal components.
To Next Page
Loading...
Need help?
General