HP ProCurve Switch 2650 User Manual

7-13
Using Authorized IP Managers
Operating Notes
• Even if you need proxy server access enabled in order to use
other applications, you can still eliminate proxy service for web
access to the switch. To do so, add the IP address or DNS name
of the switch to the non-proxy, or “Exceptions” list in the web
browser interface you are using on the authorized station.
• If you don’t need proxy server access at all on the authorized
station, then just disable the proxy server feature in the station’s
web browser interface.
!FishSecurity.book Page 13 Thursday, October 10, 2002 9:19 PM

HP ProCurve Switch 2650 Specifications

General

Switching Capacity	13.6 Gbps
Forwarding Rate	10.1 Mpps
Layer	Layer 2
Form Factor	Rack-mountable
Flash Memory	8 MB
Jumbo Frame Support	Yes
Power Supply	Internal
Management	Web, CLI, SNMP
Features	VLAN support, IGMP snooping, QoS
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% (non-condensing)
Ports	48 x 10/100
MAC Address Table Size	8, 000 entries