Removing the Removing the Pensando DSP DSC-25 2p SFP28 cardPensando DSP DSC-25 2p SFP28 card
NOTE:NOTE:
Images might differ from the actual product.
PrerequisitesPrerequisites
The DSC-25 card has been decommissioned .
ProcedureProcedure
1. Observe the following alerts:
WARNING: WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-
sensitive devices. To prevent damage, observe antistatic precautions.
CAUTION:CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either an
expansion slot cover or an expansion board installed.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Remove the server from the rack
5. Remove the access panel.
CAUTION: CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in
this manner results in improper airflow and improper cooling that can lead to thermal damage.
6. Remove the riser cage
7. Remove the DSC-25 card from the slot.
To Next Page
Loading...
