Removing and replacing an energy pack holderRemoving and replacing an energy pack holder
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel.
5. Remove the fan cage.
6. Remove the air baffle.
7. Disconnect the extension cable from the energy pack.
8. Remove the energy pack.
9. Remove the energy pack holder
To Next Page
Loading...
