Removing and replacing the fan power cableRemoving and replacing the fan power cable
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel.
5. Remove the fan cage.
6. Remove the air baffle.
7. Disconnect the fan power cable from the system board.
8. Remove the fan power cable bracket.
9. Remove the fan power cable
To Next Page
Loading...
