Removing and replacing the LFF bezel earRemoving and replacing the LFF bezel ear
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack
4. Remove the access panel.
5. Remove the fan cage.
6. Remove the air baffle.
7. Disconnect the front I/O cable.
8. Remove the cable protection panel behind the bezel ear.
To Next Page
Loading...
