Removing and replacing an energy packRemoving and replacing an energy pack
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack .
Remove the server from the rack .
4. Remove the access panel.
5. Remove the fan cage.
6. Remove the air baffle.
7. Disconnect the extension cable from the energy pack.
8. Remove the energy pack.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
