3.2.2 Power up the server
3.2.3 Extending the server from the rack
3.2.4 Removing the server from the rack
3.2.5 Remove the access panel
3.2.6 Removing the fan cage
3.2.7 Removing a riser cage
3.2.8 Install the access panel
3.2.9 Releasing the cable management arm
3.2.10 Releasing the full-length expansion board retainer
3.3 Removing and replacing the front bezel
3.4 Removing and replacing a hot-plug SAS, SATA or NVMe drive
3.5 Removing and replacing a drive blank
3.6 Removing and replacing the cable management arm
3.7 Removing and replacing a power supply
3.7.1 Power supply warnings and cautions
3.7.2 Removing and replacing a hot-plug AC power supply
3.7.3 Removing and replacing the HPE 800 W Flex Slot -48 VDC hot-plug power supply
3.7.4 Removing and replacing an HPE 1600 W Flex Slot -48 VDC hot-plug power supply
3.8 Removing and replacing a power supply blank
3.9 Removing and replacing the rack rails
3.10 Removing and replacing the hot-plug fan
3.11 Removing and replacing the fan power cable
3.12 Removing and replacing the air baffle
3.13 Removing and replacing the 8 SFF drive backplane
3.14 Removing and replacing an LFF drive backplane
3.15 Removing and replacing the 2 SFF rear drive backplane
3.16 Removing and replacing an energy pack
3.17 Removing and replacing an energy pack holder
3.18 Removing and replacing a DIMM
3.19 Removing and replacing a heatsink
3.20 Removing and replacing a processor
3.21 Removing and replacing a type-a modular storage controller
3.22 Removing and replacing an expansion board
3.23 Removing and replacing the M.2 SATA SSD add-in card
3.24 Removing and replacing the M.2 SATA SSD
3.25 Removing and replacing a PCIe riser board
3.26 Removing and replacing the HPE NS204i-p NVMe OS Boot Device option
3.26.1 Removing and replacing the boot device
3.26.2 Removing and replacing a boot device drive
3.26.3 Relocating the M.2 drive retaining latches
3.27 Removing and replacing the Pensando DSP DSC-25 2p SFP28 card
3.27.1 Decommissioning the Pensando DSP DSC-25 2p SFP28 card
3.27.2 Removing the Pensando DSP DSC-25 2p SFP28 card
3.27.3 Replacing the Pensando DSP DSC-25 2p SFP28 card
To Next Page
Loading...
