To check the audio functions on your Sprout, follow these steps:
1. From the Start screen, type control panel, and then select Control Panel.
2. Select Hardware and Sound, and then select Sound.
3. When the Sound window opens, click the Sounds tab. Under Program Events, select any sound event,
such as a beep or alarm, and click the Test button.
You should hear sound through the speakers or through connected headphones.
To check the recording functions on your Sprout, follow these steps:
1. From the Start screen, type sound, and then select Sound Recorder.
2. Click Start Recording and speak into the microphone. Save the file to your Windows desktop.
3. Open a multimedia program and play back the sound.
NOTE: To confirm or change the audio settings on your Sprout, from the Start screen, type control
panel, and then select Control Panel. Select Hardware and Sound, and then select Sound.
Software problems
●
Shut down the Sprout, and then turn it on again.
●
Update or reinstall the drivers. See
Updating programs and drivers on page 149.
●
Refresh or restore your Sprout. See
Backing up, restoring, and recovering on page 129.
ENWW Software problems 127
To Next Page
Loading...
