EasyManua.ls Logo

HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays - HP-UX SAN Rules; HP-UX SAN Configuration Rules

HP StorageWorks 4000/6000/8000 - Enterprise Virtual Arrays
456 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HP-UX SAN rules
This section describes the SAN rules for HP-UX.
For current storage system support, see the SPOCK website at http://www.hp.com/storage/spock.
You must sign up for an HP Passport to enable access.
Table 96 describes the SAN configuration rules for HP-UX. Table 97 describes support for HP-UX
multipathing coexistence.
Table 96 HP-UX SAN configuration rules
HP-UX SAN rulesStorage systems
1
Supports HP Serviceguard Clusters.
Zoning is required when HP-UX is used in a heterogeneous SAN with other operating systems.
Supports boot from SAN. For more information, see EVA SAN boot support on page 256 and XP
and VA SAN boot support on page 268.
Supports connection to a common server for mixed storage system types. See Common SAN coex-
istence on page 232.
Supports multipathing high-availability configuration in multiple fabrics or in a single fabric with
zoned paths. See Data availability on page 53.
All supported
Host name profile must be set to HP-UX
Support for HP-UX 11i v2 (June 2008 or later) using PvLinks (for MSA2000fc G2 products only)
Support for HP-UX 11i v3 using native multipathing
P2000 G3 FC
MSA2000fc G2
(MSA2300fc)
Active/active failover mode is supported for HP-UX 11i v1 and 11i v2 using the Secure Path, PvLinks,
or Veritas DMP driver. HP-UX 11i v3 is supported with native multipathing.
For HP Continuous Access EVA configuration information, see HP Continuous Access EVA SAN in-
tegration on page 254.
EVA6400
EVA8000
EVA8100
EVA8400
EVA4000
EVA4100
EVA4400
EVA6000
EVA6100
Supports connection of single HBA servers to EVA storage systems.
Active/active failover mode and active/passive failover mode are supported for HP-UX 11.0, 11i
v1, and 11i v2 using the Secure Path, PvLinks, or Veritas DMP driver. HP-UX 11i v3 is supported
with native multipathing.
For HP Continuous Access EVA configuration information, see HP Continuous Access EVA SAN in-
tegration on page 254.
EVA3000
EVA5000
VCS 4x
1
Unlisted but supported storage systems have no additional SAN configuration restrictions. For the latest support information, contact an
HP storage representative.
Heterogeneous server rules212

Table of Contents

Related product manuals